Subscriptions

Get mail on new products



Contact Us

Automatic hollow blow molding machine YFCM-A2-B

Item Code:YFCM-A2-B Features:

Automatic Hollow Blow Molding Machine

1,automatic easy operation;

2, advance design;

3,output:1800-2000PCS/H.

  • Description

Automatic Hollow Blow Molding Machine

YFCM-A2 Two automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.
 
Features of main body:
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate,
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the SMC air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: automatic and manual.
10). Safe,reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
11). Low cost,high efficiency,easy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.
13). Easy for you to install,test and start up.
14). Low rejection rate: less than 0.2 percent.

Main part:
Pneumatic part
Valve
SMC
Cylinder
Electric part
PLC
LG
Operating system
LG
Relay
OMRON
Infrared thermometer
America raytek
Note
All of the electrical components adopts CE,UL,CCC approved international advanced high-tech product.
MJain parameter:
Model
CM-A2-B
Productivity
Depend on bottle design
1800-2000PCS/H
Product type
Body diameter
240mm
Height
50mm-400mm
Neck diameter
28mm-38mm
Mold
Cavity
2cavities
Mold thick
240mm
Mold
440*400mm
Main machine power
Electrical source power
380v 3Phase /220v 3Phase  50/60HZ
Power
25kw
Really use power
6kw
 
Air source
HP air compressor
2.0m3/min 3.0MPa
Air dryer
2.0m3/min 3.0MPa
Cooling water
Cooling water
10L/min
Size
L*W*H
1910*1850*1935mm
Weight
2000kg
Auxiliary equipment(pre-form unscrambler)
L*W*H
2000*950*2480mm
Weight
250kg
Resin available
 
PET

Other Products

Product Name:
Air compressor
Model:
YFAC
Description:

Air compressor:

1.easy operation

2.advance design

3.application:bottle

Product Name:
Blow molding machine
Model:
YD-3500
Description:

Blow molding machine:

1,automatic;

2, Hugh blowing capacity;

3,Oven matched

Product Name:
Hollow Blow Molding machine
Model:
YFCM-8Y
Description:

Hollow blow molding machine

1,Semi automatic;

2, Hugh blowing capacity;

3, Capacity:1000-2000BPH;

4,Oven matched

Product Name:
Air Filter
Model:
YFAF
Description:

Air filter:

1,easy safe operation

2,advance design;

3,pressure:3mpa

Product Name:
Air dryer
Model:
YFAD
Description:

Air dryer:

1,easy safe operation

2,advance design;

3,pressure:3kg

more